Setup; Setting Up The Equipment; Setup Setting Up The Equipment - Motorola IDEN ORGANIZER User Manual

Setup

SETTING UP THE EQUIPMENT

In order to set up the equipment, you will need an IBM/PC com-
patible computer and the programming cable (part number
NKN6499A) supplied with this manual.
1. Connect the programming cable to the COM (serial) port of
the computer.
2. Power on the portable with a fully-charged battery.
3. Connect the other end of the programming cable to the bot-
tom of the portable unit (models i280, i370, i370
r300, r370, r370
Note: This setup configuration is only applicable to the models specified
for use with the programming cable. If a different programming cable is
used, access the View Menu and select Configuration Setup. In the
Quickcomm dialog box, deselect the Activate Quickcomm field. This step
is required since the Quickcomm feature allows for fast communication
only when the NKN6499A programming cable is used.
Applicable Models:
i280, i370, i370
XL
i470, i600, r300,
r370, r370
XL
and r470
iDEN
and r470 only).)
XL
MENU
Mode
Pwr/END SEND
1 2 3
QZ DEF
ABC
4 5 6
GHI JKL MNO
7 8 9
PRS TUV WXY
0
GETTING STARTED
, i470, i600,
XL
COM (serial) port
7