Table of Contents
Advertisement
Figure 5
Start Your Appliance
Your refrigerated drawers have been fitted with a Sentry Sys-
tem™ refrigeration monitor. It is located at the top front of the
cabinet and can be accessed by opening the top drawer. Your
appliance will start upon initial plug-in. On start the Sentry
System™ monitor will flash amber. This is normal. Press the "ON/
OFF" button and the appliance resets and the LED turns green.
(Refer to Figure 5 above).
Set Your Temperature Mode
This product can display either Fahrenheit or Celsius. To do so,
press the "
F/C" button on the display panel to change from one
°
to the other.
Set the desired temperature
The available temperature range of the unit is from 33° to 47°F
(1° to 8° C). This range allows flexibility of temperature prefer-
ences and provides the ideal storing and serving temperatures.
The temperature is initially set in the factory at 37° F (3° C). The
temperature set point can be lowered or raised by first pushing
the "SET" button on the display pad. A "SET" icon will be dis-
played in the temperature display. Pressing and releasing either
the "WARMER" or "COLDER" buttons located on the display pad
will raise or lower the set temperature by one (1) degree at a
time. As with any refrigeration product, there will be slight tem-
perature variance at different locations within the cabinet.
Load Your Appliance
Load your appliance with your desired items. Please note that
it may take up to 24 hours for your refrigerator to reach the de-
sired temperature once loaded. This will primarily depend on the
amount of contents loaded into the refrigerator and the amount
of opening and closings of the drawers. Consider this when
initially loading the drawers. Best results will be obtained by first
allowing the drawers to "pull down" to your set temperature
before loading the drawers.
Interior Light
The upper and lower interior lights make it easy to view your
food and beverages. The light will always come on when either
drawer is opened, except when unit is in Sabbath Mode.
USING YOUR REFRIGERATOR DRAWERS
Defrost Cycle
In order to maintain optimal performance, your refrigerator must
periodically enter a defrost cycle to clear frost buildup. During
the defrost cycles, the display will show DEF, and changes to
setpoint and °F/°C setting may not be made.
Sabbath Mode
Your refrigerated drawers are equipped with a Sabbath Mode
feature. By activating this mode, you will be disabling all dis-
plays, audible alarms and lights. To activate the Sabbath Mode,
press and hold the "SET" button while pressing the "
four (4) times within seven (7) seconds. To disable the Sabbath
Mode, repeat the process. The Sabbath Mode will deactivate
automatically after 72 hours.
LED
F/C" button
°
6
Advertisement
Table of Contents
