Page 1
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
Dimensions For Model 3CARM Solid Door......Words, and Labels. Recommended Rough in Opening Dimensions For Model 3CARM Solid Door..........Dimensions For Model 3CARM Glass Door ......Recommended Rough in Opening Dimensions For Model 3CARM Glass Door..........CAUTION- Hazards or unsafe practices which could result in Dimensions For Model 6CARM Solid Door......
UNPACKING YOUR REFRIGERATOR Remove Packaging Warranty Registration Your refrigerator has been packed for shipment with all parts It is important you send in your warranty registration card im- that could be damaged by movement securely fastened. Cut mediately after taking delivery of your refrigerator or you can the banding material at the bottom of the carton, unfold the register online at www.agamarvel.com.
To ensure your side to side and front to back. The overall height of your Marvel product performs to specifications the recommended installation refrigerator may be adjusted from 33-3/4”...
GROUNDING METHOD AND ELECTRICAL REQUIREMENTS • Do not splash or spray water from a hose on the refrigera- tor! Doing so may cause an electrical shock, which may result in severe injury or death. • This unit should not, under any circumstances, be installed to an un-grounded electrical supply.
HANDLE INSTALLATION AND DOOR ALIGNMENT Handle Installation (Solid Door Models) Door Alignment Procedure 1. Remove the handle, (2) screws, and 5/32” allen wrench from The door should be parallel to the sides and top of the refrig- the bag shipped inside the cabinet. erator.
“E1” button. After one second, set temperature will be displayed. will flash on the display. Please call AGA MARVEL customer ser- While holding “SET” button use the “WARMER” or “COLDER” vice or your dealer if this error code is displayed.
USING YOUR MICROSENTRY™ REFRIGERATOR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm. NOTE-This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will continue to flash and will sound for 20 seconds every 60 minutes.
21-3/16” 7.62 to 10.2cm) (53.82 cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 3CARM SOLID DOOR Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required. A 3 prong grounded receptacle is required. Power outlet can be located in the back wall behind unit. Add 1”...
21-3/16” 7.62 to 10.2cm) (53.82 cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 3CARM GLASS DOOR Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required. A 3 prong grounded receptacle is required. Power outlet can be located in the back wall behind unit. Add 1”...
DIMENSIONS FOR MODEL 6CARM SOLID DOOR 47-3/32” (119.61 cm) 24-7/8” (63.20 cm) 25-11/32” 23-7/8” (64.36 cm) (60.66 cm) 24-3/32” (61.19 cm) 33-3/4” to 34-3/4” (85.7 to 88.3 cm) 3” to 4” 22” (55.88 cm) 7.62 to 10.2cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 6CARM SOLID DOOR Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required.
DIMENSIONS FOR MODEL 6CARM GLASS DOOR 46-7/8” (119.08 cm) 25-19/32” (65.0 cm) 26-1/32” 23-7/8” (66.12 cm) (60.66 cm) 24-3/32” (61.19 cm) 33-3/4” to 34-3/4” (85.7 to 88.3 cm) 3” to 4” 22” (55.88 cm) 7.62 to 10.2cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 6CARM GLASS DOOR Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required.
DIMENSIONS FOR MODEL 6CADM 46-7/8” (119.08 cm) 25-19/32” (65.0 cm) 26-1/32” (66.12 cm) 23-7/8” (60.66 cm) 24-3/32” (61.19 cm) 31-1/8” to 32-1/8” (79.05 to 81.60 cm) 22” 3” to 4” (55.88 cm) 7.62 to 10.2cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 6CADM Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required.
DIMENSIONS FOR MODEL 8CARM 52-15/16” (134.47 cm) 30-7/8” (78.44 cm) 25-11/32” 29-7/8” (64.36 cm) (75.90 cm) 24-3/32” (61.19 cm) 33-3/4” to 34-3/4” (85.7 to 88.3 cm) 3” to 4” 22” (55.88 cm) 7.62 to 10.2cm) RECOMMENDED ROUGH IN OPENING DIMENSIONS, MODEL 8CARM Electrical Requirements: A 115 volt, 15 amp dedicated circuit is required.
FEATURES 3CARM Features Probe Port (optional) There are three full depth adjustable shelves for flexibility of con- The optional probe port is a hole from the inside to the outside tent storage. The shelves can move up or down to accommodate of the unit, which could be located on the top, side, or back of various content sizes.
ENERGY SAVING TIPS AND CARE AND CLEANING The following suggestions will minimize the cost of operating Condenser your refrigeration appliance. The condenser underneath the cabinet does not require fre- quent cleaning; however, satisfactory cooling depends on ad- 1. Do not install your appliance next to a hot appliance, (ovens, equate ventilation over this heat exchanger.
If Service is Required: • If the product is within the first year warranty period please contact your dealer or call AGA MARVEL Customer Service at 800.223.3900 for directions on how to obtain warranty For Your Records coverage in your area.
AGA MARVEL shall issue a credit to the buyer The warranties set forth herein are the only warranties extend- for all or part of the purchase price, as AGA MARVEL shall deter- ed by AGA MARVEL and are in lieu of all warranties, express, mine.
APPENDIX A, ADDITIONAL MICROSENTRY™ FEATURES temperature alarm will activate at 9°C = (4 [set temperature] + 3 Information Menu / Lockout Key [Ahi] + 2 [hysteresis]) To access the information menu, press the SET key, and immedi- ately release it. 5) Relative Low Temperature Alarm (ALO): The number of degrees C colder relative to set tem In the information menu, a 2 or 3 digit code will be displayed...
Page 21
www.agamarvel.com 1260 E. VanDeinse St. Greenville MI 48838-0400 800.223.3900 41011808-EN Rev E 6/8/11 All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products.
Page 22
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...