GE Profile DPGT750 Owner's Manual And Installation Instructions page 23

Installation instructions
CONNECTING THE DRYER TO THE
GAS SUPPLY
[] Install a female 3/8" NPT elbow at the end
of the dryer gas inlet.
Install a 3/8" flare union adapter to the
female elbow.
IMPORTANT: Use a pipe wrench to
securely hold on to the end of the dryer
gas inlet to prevent twisting the inlet.
NOTE: Apply pipe compound or Teflon ®
tape to the threads of the adapter and
dryer gas inlet.
_x Dryer Gas Inlet
/
Apply Pipe Compound
[] Attach the flexible metal gas line
connector to the adapter.
[] Tighten the flexible gas line connection
using two adjustable wrenches.
CONNECTING THE DRYER TO THE
GAS SUPPLY (cont.)
[]
Install a 1/8" NPT plugged tapping to the
dryer gas line shut-off valve for checking
gas inlet pressure.
Install a flare union adapter to the plugged
tapping.
NOTE: Apply pipe compound or Teflon ®
tape to the threads of the adapter and
plugged tapping.
Apply pipe compound or
Teflon _ tape to all male
threads.
Tapping
Shut-off
[] Tighten all connections using two
adjustable wrenches. Do not overtighten.
[] Open the gas shutoff valve.
23