GE Profile DPGT750 Owner's Manual And Installation Instructions page 27

Installation Instructions
CONNECTING DRYER POWER
CORD (cont.)
[] For 3-wire Connection ONLY:
Be sure the dryer's green ground wire
is connected to green ground screw on
cabinet rear.
e
(3-wire Connection Shown)
For 4-wire Connection ONLY:
Remove the dryer's ground wire from
behind the green ground screw and
connect it to the center screw of the
terminal block.
Attach ground wire of power cord to the
cabinet with the green ground screw.
Power
Ground
Wi re
(4-wire Connection Shown)
CONNECTING DRYER POWER
CORD (cont.)
[] For 3-wire and 4-wire Connection:
Connect the neutral (center line on 3-wire,
white line on 4-wire) line to the center of
terminal block.
Connect
center
-- A
(3-wire Connection Shown)
[] For 3-wire and 4-wire Connection: Tighten
all terminal block screws completely.
(3-wire Connection Shown)
[] For 3-wire and 4-wire Connection:
Reinstall the terminal block access cover.
IMPORTANT: Do not leave the access
cover off.
(3-wire Connection Shown)
27