Embedded Web Server Does Not Open; Uneven Print Density - Dell B3460DN Mono Laser User Manual

Troubleshooting
Action
Step 1
From the Paper menu on the printer control panel, check the paper type
and weight.
Do the paper type and texture match the paper loaded in the tray?
Step 2
Check if you are printing on paper with texture or rough finishes.
Are you printing on textured or rough paper?

Uneven print density

Action
Replace the imaging unit, and then resend the print job.
Is the print density uneven?

Embedded Web Server does not open

Action
Step 1
a
Turn on the printer.
b
Open a Web browser, and then type the printer IP address.
c
Press Enter.
Does the Embedded Web Server open?
Yes No
Go to step 2. Specify the paper type
and weight from the
tray settings to match
the paper loaded in the
tray.
From the Paper menu Contact
on the printer control support
panel, set the paper printer dealer.
texture.
Yes No
Contact technical The problem is solved.
support.
Yes No
The problem is solved. Go to step 2.
156
technical
or your Dell