Changing The Melody Voice; Turning Each Part On/Off - Yamaha PSR-E360 Owner's Manual

3
When playback reaches to the point you want to specify as the
end point, press the [A B] button again to set the B point.
The specified A-B section of the song will now play repeatedly.
NOTE
• You can also set the A-B Repeat function when the Song is stopped. Simply use the [
>>
(Fast Reverse) and [ ] (Fast Forward) buttons to select the desired measures, pressing
the [A B] button for each point, then start playback.
• If you want to set the start point "A" at the top of the Song, press the [A
starting playback.
• If you want to set end point "B" to the end of the Song, specify only the A point and play
back the Song to the end.
4
To cancel repeat playback, press the [A

To stop playback, press the [>/
NOTE
• The A-B Repeat function will be canceled when you select another Song.

Changing the Melody Voice

You can change a Song's melody Voice to any other desired Voice.
1
Select a Song.
2
Select the desired Voice.
3
Hold down the [VOICE] button for longer than a second.
"SONG MELODY VOICE" appears in the display for a few seconds, and the
selected Voice replaces the Song's original melody Voice.
NOTE
• Selecting another Song will cancel the changed Melody Voice.
• You cannot change the melody Voice of a User Song.
B] button before
B] button.
] (Start/Stop) button.

Turning Each Part On/Off

As indicated above the panel buttons (shown below), a Song consists of two
Parts, which can be turned on or off individually by pressing the corresponding
button, [L] or [R].
<<
]
By turning the left- and right-hand parts on or off during playback, you can listen
to the Part (that is turned on), or practice the other part (that is turned off) on the
keyboard.
NOTE
• Selecting another Song will cancel the on/off status of the Parts.
Playing Songs
Voglein
043
010
Unlit: Track is muted or con-
Lit: Track contains data
tains no data
PSR-E360 Owner's Manual
21