Connecting A Digitalaudio System; Connecting A Pc - Samsung PN42B400P3DXZA Owner's Manual And Installation

Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV,
Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL)
jacks on the Digital Audio System.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL)jack : Decrease the volume of the TV, and
adjust the volume level with the system's volume control.
TV Rear Panel
Digital Audio System
J
Optical Cab{e (Not supplied)
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is displaying a
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such
as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-Ray player or Cable/
Satellite Box directly to an Amplifier or Home Theater, not the TV.
Connecting a PC
[] Usingan HDMI Cable
1. Connect an HDMI/DVl cable between the HDMI IN I(DVl) jack on the TV and the PC output jack on your computer.
2. Connect a 3.5 mm Stereo plug to 2RCA cable between the DVl AUDIO IN jack on the TV and the Audio Out jack of the sound card
on your computer.
PC
_3.5 mm Stereo plug (Not supplied)
_ HDMI/DVI Cable (Not supplied}
TV Rear Panel
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVl cable connection, you must use the HDMI IN I(DVl) terminal.