Setting The Time - Samsung PN42B400P3DXZA Owner's Manual And Installation

Setting the Time
Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching
the TV, (Just press the INFO button,)
[] Time
1. Press the MENU button to display the menu.
2. Press the A or V' button to select Setup, then press the ENTER_ button.
3. Press the A or V button to select Time, then press the ENTER_ button.
Clock
• Clock Mode _ Auto / Manual
You can set up the current time manually or automatically.
• Clock Set
You can set the current time manually.
@ This function is only available when Clock Mode is set to Manual.
@ You can set the Month, Day, Year, Hour, or Minute directly by pressing the
number buttons on the remote control.
• Time Zone
Select your time zone.
This function is only available when Clock Mode is set to Auto.
Depending on the broadcast station and signal, the auto time may not be set
correctly. If this occurs, set the time manually.
The Antenna or cable must be connected in order to set the time automatically.
• DST (Daylight Saving Time) _ Off / On / Auto
Switches the Daylight Saving Time function on or off.
This function is only available when Clock Mode is set to Auto.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset time
(30, 60, 90, 120,150 and 180 minutes).
You can also set the sleep timer by selecting Tools _ Sleep Time[
Timer 1 / Timer 2 / Timer 3
Use this feature to set the TV to turn on or off at a desired time. 3 different On/Off times
can be set. You must set the clock first.
• On Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to Activate.)
• Off Time: Set the Hour, Minute, am/pm, and Activate/Inactivate.
(To activate timer with the setting you've chosen, set to Activate.)
• Volume: Set the required volume level.
• Antenna: SelectAir or Cable.
When you set the timer, Antenna is inactivated.
If you want to set the Antenna, refer to page 19.
• Channel: Select the desired channel.
• Repeat: Select Once, Everyday, Mon~Fri, Mort-Sat, Sat-Sun, or Manual.
@ When Manual is selected, press the _- button to select the desired day of the
week. Press the ENTER _ button over the desired day and the ,,/ mark will appear.
@ You can set the hour, minute and channel by pressing the number buttons on the remote control.
@ Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned
on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too
long time.