Connecting A Digitalaudio System; Connecting An Amplifier / Dvd Home Theater - Samsung PN50A400C2DXZA User Manual

Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theaterlReceiver) to your
TV.
Connect an Optical Cable
between the DIGITALAUDIO
OUT (OPTICAL) jacks on
the TV and the Digital Audio
Input (OPTICAL) jacks on the
DigitalAudio System.
When a Digital Audio System
is connected to the DIGITAL
AUDIO OUT (OPTICAL)
terminal:
Decrease the volume of the
TV, and adjust the volume
level with the system's
volume control.
Digital Audio System
TV Rear Panel
\ J
What is OPTICAL?
• Converts the electric signal into an optical lightsignal, and transmits it through glass
fibers. S/PDIF is a transmission system of digital audio in the form of a light wave
that uses a glass conductor.
5.1CH audio is possible when the TV is connected to an external device
supporting 5.1CH.
Each external input source device has a different back panel configuration.
When the receiver (home theater) is set to On, you can hear sound output from
the TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send
out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel
sound will be heard from the Home Theater receiver.
Connecting an Amplifier / DVD Home Theater
Connect Audio Cables
between the AUDIO OUT
JR-AUDIO-L] on the TV and
AUDIO IN [L-AUDIO-R] on
the Amplifier / DVD Home
Theater.
When an audio amplifier is
connected to the AUDIO OUT
JR-AUDIO-L] jacks terminals:
Decrease the volume of the
TV, and adjust the volume
level with the Amplifier's
volume control.
Amplifier / DVD Home Theater
(Not supplied)
TV Rear Panel
......
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier / DVD Home Theater, match the color of the
connection terminal to the cable.