Samsung PN42B400P3DXZA Owner's Manual And Installation page 23

Temporary image retention may occur when viewing a static image on the set for more than two hours.
After selecting Zoom1, Zoom2 or Wide Fit:
Press the 4 or _ button to select Position, then press the ENTER _ button.
Press the A or T button to move the picture up and down.
Reset: Press the _ or _- button to select Reset, then press the ENTER _ button.
You can initialize the setting.
@ After selecting Screen Fit in HDMI (108Oi/1O80p)or Component (I080i/I080p) mode, you made need to center the picture:
Press the 4 or _. button to select Position, then press the ENTER _ button.
Press the A, T, _ or _. button to move the picture.
Reset: Press the _ or _ button to select Reset, then press the ENTER L--;'*" button. The TV will be reset to 16:9.
@ HD (High Definition): 16:9- 108Oi/1O80p(1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
ATV,Video, Component (480i, 480p), HDMI (480p) 16:9, Zoom1, Zoom2, 4:3
Component (720p) 16:9, Wide Fit, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, I080i, I080p) 16:9, 4:3, Wide Fit, Screen Fit
Digital NR
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
• Off: Turns the Digital NR function off.
• Low: Sets Digital NR to low.
• Medium: Sets Digital NR to medium.
• High: Sets Digital NR to high.
• Auto: Sets Digital NR to Auto.
HDMI Black Level
You can directly select the black level on the screen to adjust the screen depth.
• Normal: The screen gets brighter.
• Low: The screen gets darker.
This function is active only when an external device is connected to the TV via HDMI.
HDMI Black Level function may not be compatible with all external devices.
Fi_m Mode
The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
• Off: Basic video image processing applied and No auto-detection for
film-based programs.
• Auto: Automatically adjusts for the best image quality between film and
video programs.
@ Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
Continued...