Canon MX7600 - PIXMA Color Inkjet Network Setup Manual page 23

11
When the Installation completed
successfully screen appears, click Restart.
The software installation is complete.
When the computer restarts, the Canon IJ Network
Tool will start up automatically. Proceed with the
network setup from following step 12.
After the computer restarts, remove the Setup CD-
ROM.
Note
Keep the CD-ROM in a safe place in case you need to
reinstall the software.
When using Mac OS X v.10.3.9:
Restarting the computer while connected to the
machine may cause the machine not to be
detected. To resolve this, either unplug the USB
cable then plug it back in again, or turn the machine
off then back on again.
Note
When using Mac OS X v.10.3.9, before using the
Operation Panel on the machine to save scanned originals
to the computer, it is necessary to select MP Navigator EX
as the launch application on Image Capture under
Applications. For details, refer to "Scanning Images" in
the User's Guide on-screen manual.
Setting Up the Machine and the Computer (Macintosh) 21