Setting Up The Machine And The Computer (Windows) - Canon MX7600 - PIXMA Color Inkjet Network Setup Manual

Setting Up the Machine and the
Computer (Windows)
To use the machine connected to a computer, you need to install the software called "MP Drivers" in
the computer.
The following two connection types are described in this manual.
(A)
When the machine has not been connected to the network, perform this setup to use the
machine over wired LAN. This setup procedure requires settings to be performed on the
machine and the computer.
Note
To set up the machine that is not yet connected to a wired LAN, connect the machine and the
computer with a USB cable.
Even if the machine has been set up to be used with the USB connection, follow the setup
procedure described in this manual to connect the machine to a wired LAN for the first time.
Setting Up an Additional LAN-connected Computer
(A)
When the machine has already been set up to connect to the network, perform this setup to
use the machine from an additional computer over wired LAN. This setup procedure only
requires settings to be performed on the additional computer.

Setting Up the Machine and the Computer (Windows)

Setting Up for Use over Wired LAN
(B)
(B)
(A) This machine
(B) Hub or router
(C) Computer
(C)
(C)
(A) This machine
(B) Hub or router
(C) Connected computer
(D) Additional computer
(D)
1