Canon MX7600 - PIXMA Color Inkjet Network Setup Manual page 10

5
When the Network Setup of the Card Slot
dialog box appears, specify the drive letter,
then click Next.
This screen will not appear in Windows Vista.
Note
The Card Slot of the machine must be mounted to
be used as the memory card drive of the LAN-
connected computer.
To write files to a memory card, set the Read/write
attribute setting under Device settings to LAN
enabled. If the setting is set to USB enabled, you
cannot access the network drive of the Card Slot.
If "Communication with the Card Slot failed." is
displayed, click Retry. If it still fails, see
""Communication with the Card Slot failed." is
displayed" on page 35.
If "Cannot map any more drives, because all the
drive letters are assigned." is displayed, click
Skip to complete the setup. After software
installation is complete, remove any drive letter and
try the network setup of the Card Slot again using
the Canon IJ Network Tool.
If "The Card Slot is already mapped as Network
Drive to this computer." is displayed, the Card
Slot is already set up. Click OK, then click Next.
6
When the Setup Completion dialog box
appears, remove the USB cable, then click
Finish.
The network connection between the machine and
the computer is now successfully established.
To confirm the setup results, click View Setup
Results.
Note
To change the port name, click View Setup
Results, then click Set Port Name on the Setup
Results dialog box. For details, see "Changing the
Port Name (Windows)" on page 37.
If "Unsafe Removal of Device" is displayed, click
OK.
7
When the Setup Complete screen appears,
click Next.
8 Setting Up the Machine and the Computer (Windows)