Safety Precautions - Emotiva RPA-1 User Manual

Safety Precautions

Read this User's Guide thoroughly before attempting to install and configure the Emotiva RPA-1 Amplifier.
All the safety and operation instructions should be read before any operation of the component(s) begin.
After successful installation and configuration of the Emotiva RPA-1 Reference Power Amplifier, be sure to
retain this manual in a safe place for any future reference needs.
All warnings on the Emotiva RPA-1 Reference Power Amplifier and in these operating instructions should
be followed. Safety is a key component to a long lasting and trouble free installation. The vast majority
of the subsequent safety precautions involve simple common sense. If you are not comfortable with the
installation of audio/video entertainment equipment, it will be to your benefit to seek the services of a
qualified installation professional.
• The Emotiva RPA-1 Amplifier should NEVER be used near water such as a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
• The Emotiva RPA-1 Amplifier should be situated so that its location or installation position does not interfere with
proper ventilation.
• The Emotiva RPA-1 Amplifier should not be situated on a bed, sofa, rug, or similar surface that may block any
ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack
that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom
installations, be sure to add forced air ventilation so that it has adequate air circulation.
• The Emotiva RPA-1 Amplifier should be situated away from heat sources such as radiators, or any other devices
which produce heat.
• The Emotiva RPA-1 Amplifier should be connected to a power supply only of the type described in this User's
Guide and what is labeled on the RPA-1 component. Power supply cords should be routed so that they are not in
high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords at
the wall plugs, convenience receptacles, and the point where they connect into the RPA-1 Amplifier. The power
cord of the RPA-1 Amplifier should be unplugged from the outlet when unused for a long period of time.
When it's time for cleaning the Emotiva RPA-1 Amplifier, it should be cleaned only as recommended in this
User's Guide. Never spray liquids directly into the component's vent openings. Care should be taken so that
small objects do not fall into the inside of the RPA-1 Amplifier.
The following situations require your Emotiva RPA-1 Amplifier is serviced only by qualified service personnel:
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the component; or
3. The RPA-1 has been exposed to rain; or
4. The RPA-1 does not appear to operate normally or exhibits a marked change in performance; or
5. The RPA-1 has been dropped, or its enclosure or chassis is damaged.
The user should not attempt to service the RPA-1 Amplifier beyond the means described in this User's Guide.
All other servicing should be referred to qualified service personnel.
Page 4