Front Panel; Rear Panel Terminals - Panasonic SC-BT300 Operating Instructions Manual

Control
Front panel
reference guide (main unit)
:.............................................................................................. "=.= 2....... _'_;
®
POWER button (POWER aO/I (_ 19)
Press to switch the unit from on to standby mode or vice-versa. In
standby mode, the unit is still consuming a small amount of power.
@ Open or close the disc tray (_ 19)
SMART SETUP button (_ 15)
@ Stop (_ 19)
_) Start play (_, 19)
Disc tray (_ 19)
Connect iPod (_, 30)
SD card slot (_ 19)
@ Connect Auto speaker setup microphone (_ 15)
O The indicator lights when there is surround sound effect. (_ 18)
@ Display
i_ Pullopen
@ Select the source
BD/DVD---> SD--->IPOD---> FM--->AM--->AUX--->D-IN 1--->D-IN 2
t I
"SD" on the unit's display is not displayed when the SD card is not in
the SD card slot.
@ Skip or slow-search play (_ 20) / Select the radio stations (_ 26)
@ Volume indicator
• It is possible to set the indicator to turn on/off. (_ 38, FL Display)
@ Adjust the volume of the main unit (_ 19)
• When pulled hard, the volume knob may come off.
To prevent children from swallowing the volume knob, do not pull
off the volume knob.
_) Connect headphones (not included) (_ 19)
@ Remote control signal sensor
Rear panel terminals
AC iN
AC IN -- terminal (_ 14)
@ Cooling fan
_) SPEAKERS terminal (_, 9)
@ AUX(TV)terminal (_ 10, 11)
This terminal can also be used for equipment other than the TV.
COMPONENT VIDEO OUT terminal (_ 11)
_) OPTICAL DIGITAL IN terminals
Terminal I(TV) is designated for connection with the TV (_ 10, 11)
Terminal 2(STB) can be used with equipment other than the STB
(_ 12)
O Radio antenna terminals (_ 13)
Digital transmitter dock (_ 45)
@ LAN port (_ 14)
O HDMI AV OUT terminal (_ 11)
@ VIDEO OUT terminal (_ 10)
RQT9371