Panasonic SC-BT300 Operating Instructions Manual page 15

SMART SETUP
The SMART SETUP screen assists you to make the necessary settings.
When the system is switched on for the first time, the SMART SETUP screen for the basic settings is displayed automatically. Follow the
on-screen prompts to make basic settings for the system.
Preparation
To optimize the surround sound experience we recommend that you
setup the speaker output level using the Auto speaker setup function.
Keep as quiet as possible during the Auto speaker setup. Loud
voices, air-conditioning noise, or excessive wind may lead to
incorrect settings. The speakers output loud test signals during
setup.
• Place the Auto speaker setup microphone at the actual seating
position. (At ear level when seated.)
• A test signal is output from each speaker during the SMART SETUP.
• After the SMART SETUP is completed, unplug the Auto speaker
setup microphone and keep it for future use.
Basic settings for the system
(SMART SETUP)
Preparation
Turn on your TV and select the appropriate video input mode (e.g.,
VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
• To change your TV's video input mode, refer to its operating
instructions.
• This remote control can perform some basic TV operations (_ 5).
d) m
BD/SD
OK
RETURN
SMART SETUP
i_ ¸
i_ -Auto Speaker setup Canbe activated through SMART
SETUP only,
• Audio settings will be restored to default if the Auto
NOTE speaker setup is canceled.
O Press [_].
oWhen the SMART SETUP screen appears automatically, skip
step 2 and 3.
_ Press [BD/SD] to select "BD/DVD",
!_) Press [SMART SETUP] on the main unit.
• The SMART SETUP screen appears.
O Follow the on-screen instructions and make the
settings with [A, Y, 4, I_] and [OK].
• Language (_ below)
Select the language used on menu screen.
=TV Aspect (=> below)
Select the aspect to suit your TV and preference.
• Speaker position
Specify the positioning of the surround and surround back
speakers.
=Auto Speaker Setup
Adjust the speaker output level automatically
=Speaker Output
Make surround sound setting for speaker output.
=TV Audio
Select the audio input connection from your TV.
For AUX connection (_ 10): Select "AUX'.
For OPTICAL DIGITAL IN connection (_, 10):
Select "DIGITAL IN 1"
This will be the TV audio setting for VIERA Link "HDAVI
Control". (_ 28)
To return to the previous screen, press [RETURN].
Q Press [OK] to finish the SMART SETUP.
_-"', •if this Unit is c0nnected to a _'HDAVI contrOl 3 (0r later)!' Compatible Tvvia HDMI cable the menu language and TV aspect
information will be retrieved Via VIERA Link.
• If this unit is connected to a "HDAVl Control 2' compatible TV via HDMI cable the menu language information will be retrieved via
NOTE VIERA Link.
• Even if this unit is connected to a 'IHDAVI Control 2 (or later), compatible TV via HDMI cable, the menu screen language will not be
automatically retrieved if this unit does not support the language In this case, set the language manually.
• Settings in the SMART SETUP can also be changed in the player settings [e gl, language, TV aspect, speaker level and TV audi0
(_ 37)]
• Positioning examples for mounting all speakers in front. (_ 8)
RQT9371