Panasonic SC-BT300 Operating Instructions Manual page 40

RQT9371
Changing the unit's settings
To select these settings, perform steps O to 0 (_ 37)
"Network"
IP Address/DNS Settings (_ 33)
• Press [OK] to show the following settings.
Connection Test
IP Address Auto Configuration ( DHCP )
IP Address
Subnet Mask
Default Gateway
DNS Auto Configuration ( DHCP )
Primary DNS
Secondary DNS
Auto Detect Connection Speed
Connection Speed Setting
This is enabled only when "Auto Detect Connection Speed" is
turned "Off".
Proxy Server Settings (_ 34)
• Press [OK] to show the following settings.
Reset to factory preset
Proxy Address
Proxy Port Number
Connection Test
Network Service (VlERA CAST) (_ 32)
• Press [OK] to show the following settings.
Network Lock
You can restrict using VIERA CAST.
Follow the on-screen instructions. Enter a 4-digit password with
the numbered buttons when the password screen is shown. It
will be the common password for "DVD-Video Ratings",
"BD-Video Ratings" and "Network Lock".
• Do not forget your password,
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted
automatically to the standard volume while using the VIERA
CAST.
• Depending on contents, this function effect will not work.
• Select "Off" when the audio is warped.
Reduce to Screen Size
The screen is displayed reduced so the displayed screen of the
VlERA CAST does not get truncated.
Time Zone
By selecting the time zone, it is possible to set the unit's time to
match your location.
• Some VIERA CAST contents require the time zone to be set.
Set the time zone if necessary.
• Oil • Off
• Oil • Off
• Oil • Off
• 10BASE Half Duplex
• 100BASE Half Duplex
• Yes • N__0_o
(The initial setting is blank.)
(The initial setting is "0".)
• 10BASE Full Duplex
• 100BASE Full Duplex
• On •Off
Changing settings (When "On" is selected)
• Change Password
• Oil • Off
• On •Off
• GMT -12 to -I-12
(The initial setting is "-5".)
GMT -5 EST (Eastern Standard Time)
GMT -6 CST (Central Standard Time)
GMT -7 MST (Mountain Standard Time)
GMT -8 PST (Pacific Standard Time)
GMT -9 AKST (Alaska Standard Time)
GMT -10 HST (Hawaii Standard Time)
DST • On • Off
Select "On" when using Daylight Saving time.
MAC Address (_ 33)
Displays the "MAC Address" of this unit.
"Others"
Off Timer •2 Hours •6 Hours •Off
Select how long the unit remains on when it is not being used.
• Effective only when "BD/DVD" or "SD" is selected as source.
Remote Control Code (_ 50) • Set Code 1
Restore Default Settings •Yes • N__0_o
This returns all values in the Setup menu and the on-screen
menu, except for "Remote Control Code", "On-screen Language",
"IP Address/DNS Settings", "Proxy Server Settings", "Network
Service", "DVD-Video Ratings" and "BD-Video Ratings" to the
default settings.
Firmware Update (_ 32)
• Press [OK] to show the following settings.
Automatic Update Check • On •Off
When this equipment remains connected to the Internet, it will
check for the latest firmware version when it is turned on and
you can update it if necessary.
Update Now • Yes • N__oo
You can update the firmware manually.
• Set Code 2