Panasonic SC-BT300 Operating Instructions Manual page 50

Troubleshooting guide
Network
Page
Other difficulties with playback
BD-Video or DVD-Video is not
played.
The BD-Live is not played with
BD-Video.
No subtitles.
Angle cannot be changed.
• Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is
not defective.
• You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
• Some BD-Video can only be output with HDMI.
• Confirm whether the disc supports the BD-Live.
• The inserted SD card does not have sufficient available capacity.
• The SD card is write-protected.
• Sub contents copied to an SD card are provided by the disc producer as a part of the
BD-Video content. Even if you record images and audio onto an SD card, it cannot be played
as a BD-Live.
• Subtitles are not recorded on the disc.
• Turn the subtitles on. Set "Subtitle" on the on-screen menu to "On".
• When progressive output is on, closed captions cannot be displayed.
• Angles can only be changed during scenes where different angles are recorded.
22
22
43
22
When other Panasonic products respond to this remote control
Change the remote control code on this unit and the remote control (the two must match) if you place other Panasonic products close together.
1) Press [BD/SD] to select "BD/DVD" or "SD".
2) While stopped, press [SETUP].
3) Press [A, T] to select "Others" and press [OK].
4) Press [A, T] to select "Remote Control Code" and press
[OK].
5) Press [A, T] to select the code (1 or 2) and press [OK].
6) To change the code on the remote control
While pressing [OK], press and hold the numbered button
([1] or [2] ) for more than 5 seconds.
7) Press [OK].
NOTE
When the following indicator appears on the
unit's display and you are unable to operate
the unit
e.g.
The unit's remote control code
Press and hold [OK] and the indicated number
button at the same time for more than 5 seconds.
RQT9371