What Is Vlera Link "Hdavl Control; What You Can Do With "Hdavl Control; Linked Operations With The Tv - Panasonic SC-BT300 Operating Instructions Manual

Linked operations with the TV
(VIERA Link TM"HDAVI
Control TM'')
What is VIERA Link "HDAVI Control"?
VIERA Link
TM
is a new name for EZ Sync
TM.
VIERA Link "HDAVI Control" is a convenient function that offers linked
operations of this unit, and a Panasonic TV (VlERA) under "H DAVl Control".
You can use this function by connecting the equipment with an HDMI cable. See
the operating instructions for connected equipment for operational details.
Preparation
O Connect this unit to your TV with an HDMI cable. (_ 11)
O Set "VIERA Link" to "On". (_ 39)
(The default setting is "On".)
_) Set the "HDAVI Control" operations on the connected equipment (e.g., TV).
O Turn on all "HDAVI Control" compatible equipment and select this unit's input
channel on the connected TV so that the "HDAVI Control" function works
• VIERA Link!!HDAVI Contror _,based on the control
functions provided by HDMI Which is an industrY
standard known as HDMI CEC (Consumer
NOTE Electronics Control), is a unique function that we
have developed and added. As such, itsoperation
with other manufacturers' equipment that
supports HDMI CEC cannot _ gua[anteed_
• This unit supports !,HDAVI Control 4,, function.
"HDAVI Control 4'!is the newest standard
(current as of December, 2008) for Panasonic's
HDAVI Control compatible equipment. This
Standard is compatible with Panas0nic's
conventional HDAVI equipment.
properly •
.. . .............. Please refer to individual manuals for other
Also wnen [ne connecuon or se[ungs are cnangee, repeal [nls proceaure, manufacturers' equipment supporting VIERA
Setting the TV audio for VIERA Link !,HDAVI
Control,! .L'_sk_Unct_endedtha t ouu
e
y s
You can set the main unit to link audio operations with the TV.
• Setting the audio from the TV
RP-CDHG10 (1.0 m/3.3 ft.), RP-CDHG! 5 (1.5 m/
Preparation 4.9 ft.),RP-CDHG20 (2.0 m/6.6 ft_)iRP-CDHG30
• Select between "AUX" and "D-IN 1" (DIGITAL IN 1) to work with the linked (3.0 rn/9.8 ft.), RP,CDHG50 (5.0 m/16.4 ft.), etc.
operations for the TV audio.
- Confirm the audio connection to the AUX(TV) terminal (for "AUX') or Non-HDMI-compliant cables cannot be utilized,
OPTICAL I(TV)terminal (for "D-IN 1"). (_ 11)
With the remote control of the main unit;
O Press [EXT-IN] to select "AUX" or "D-IN 1" (DIGITAL IN 1).
Press [STATUS].
_) Press [&, V] to select "TV AUDIO".
O Press [<, I_] to switch "AUX" or "D-IN 1" (DIGITAL IN 1) and press [OK].
Whenever the connection or settings are changed, reconfirm the points above.
• Setting the audio from the STB
This unit can be set to link operations with the TV so as to output audio from the
connected STB, etc. when the TV input is set to the input channel designated for
the STB, etc.
Preparation
• Select the STB input channel on the TV.
• Confirm the audio connection to the OPTICAL 2(STB) terminal (for "D-IN 2"). (; 12)
With the remote control of the main unit;
O Press [EXT-IN] to select "D-IN 2" (DIGITAL IN 2).
Press [STATUS].
• The connected STB must also be connected
to the TV via an HDMI cable.
Refer to the operating instructions of the
N °TE respective device for details,
_,_ • It is also possible to connect an HDMI and
[L_' i optical output compatible Panasonic DVD
_ _----_--_ recorder n the p ace of the STB.
Press [A, V] to select "CABLE/SAT AUDIO".
O Press [<, I_] to select "SET" and press [OK].
• If the input channel of the STB on the TV is changed or if you want to change
the device allocated for the linked operations, select "OFF" in step O above and
then repeat steps O to O.
What you can do with "HDAVI Control"
You can select whether audio is output from the unit's speakers or the TV speakers by using the TV menu settings. For details, refer to the
operating instructions of your TV.
Home theater
This unit's speakers are active.
• When this unit is in standby mode, changing the TV speakers to this unit's speakers in the TV menu will automatically turn the unit on and
select "AUX ".1, "D-IN 1" (DIGITAL IN 1) .1 or "D-IN 2" (DIGITAL IN 2) *2 as the source.
• The TV speakers are automatically muted.
• You can control the volume setting using the volume or mute button on the TV's remote control. (The volume level is displayed on the main
unit's FL display.)
• To cancel muting, you can also use the home theater remote control (_ 19).
• If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
• The volume of this unit is set to "0".
-This function works when "BD/DVD', "SD', "AUX ".1, "D-IN 1" (DIGITAL IN 1) .1 or "D-IN 2" (DIGITAL IN 2) *2 is selected as the source on the
home theater system.
• Audio output is 2-channel audio.
• When '!TV'! iS selected in !!speaker c0ntrol'i the audio from an iPod wil not be output from the TV!s speakers during s!ideshow
backgr°und mUS!Cplayback. (
NOTE
When switching between this unit's speakers and TV speakers, the TV screen may be blank for several seconds.
RQT9371