Konica Minolta bizhub C754 User Manual page 19

5.1 Loading the original into the ADF
Loading the original into the ADF
The ADF feeds original sheets one by one in order from the top, and automatically loads them. For a 2-sided
original, the front and back sides are loaded simultaneously.
The ADF is helpful when loading a large number of original.
1
Widen the Lateral Guide.
2
Put the first page of an original at the top, and load the original
into the Original Tray with the required side facing upward.
% Load the original so that its top side is placed at the back.
When loading in a different orientation, be sure to specify
the loading direction of originals.
% For details on the loading direction of originals, refer to
[User's Guide: Copy Operations].
NOTICE
Do not load more than 150 sheets at a time into the Original
Tray, and do not load the sheets up to the point where the top
of the stack is higher than the , mark. Doing so may cause the
originals to jam, damage the originals and/or ADF failure.
However, if the original contains more than 150 pages, it can
be scanned separately.
3
Slide the Lateral Guide to fit the loaded original.
bizhub C754/C654
5
5-3