Sorting Copied Paper ([Finishing]) - Konica Minolta bizhub C654 User Manual

1.3 Using the copy function

Sorting copied paper ([Finishing])

Specify how to feed out copied sheets of paper.
%
Tap [Basic] - [Finishing].
Settings
[Collate (By Set)], [Group]
[Offset]
[Staple/Punch]
[Fold/Bind]
bizhub C754/C654
Description
Select the output method when multiple sets of copies are printed.
• [Collate (By Set)]: Feeds out copies separately one by one like "12345",
"12345", "12345".
• [Group]: Feeds out copies separately page by page like "111", "222",
"333", "444", "555".
Select [Yes] when sorting by copies or by page to feed out paper.
If the Finisher is installed, the copies are fed out and stacked on top of
each other with each copy or page set staggered to separate them.
If no Finisher is installed, printed copies are fed out and sorted in an alter-
nating crisscross pattern when the following conditions are satisfied.
• 8-1/2 e 11, A4, or B5 paper is used.
• Paper of the same size and type is loaded with the w orientation into
one paper tray and with the v orientation into another tray
• Specifying Auto Paper for the paper size setting
[Staple]: Select a binding position to staple sheets.
• [Corner]: Each set of printed sheets is stapled in a corner (top left or top
right) before it is output.
• [2 Position]: Each set of printed sheets is stapled at two positions (in the
top, left, or right) before it is output.
• [Position Setting]: Select the binding position and original loading di-
rection. If [Auto] is specified for the binding position, the binding posi-
tion is determined automatically based on the direction of the loaded
original.
[Punch]: Select binding positions when punching sheets.
• [Position Setting]: Select the punch position and original loading direc-
tion. If [Auto] is specified for the punch position, the punch position is
determined automatically based on the direction of the loaded original.
Select how to fold or bind paper.
• [Half-Fold]: Feeds out a copied sheet by folding it in two.
• [Center Staple&Fold]: Staples and feeds out a copied sheet by folding
it in two.
• [Tri-Fold]: Feeds out a copied sheet by folding it in three.
• [Z-Fold]: Z-folds the long side of a copied sheet before feeding it out.
This option is available when printing paper of 11 e 17 w, 8-1/2 e 14 w,
A3 w, B4 w, or 8K w. Selecting 8-1/2 e 14 w folds paper in two instead
of Z-folding.
1
1-20