Total Counter Notification Settings; Notification Schedule Setting - Konica Minolta bizhub C650 User Manual

Network Settings
4.22

Total Counter Notification Settings

Specify the schedule and destination of notifications about the total counter. Settings can be specified for
the following.
Parameter
Notification Schedule Set-
ting
Address Setting
Model Name
Send
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 3-5.
2
Touch [Fwd.→] in the Network Settings screen, and then touch [5 Detail Settings].
3
Touch [4 Total Counter Notification Settings].
The Total Counter Notif. Setting screen appears.
4
Specify the desired settings.
5
Touch [Close].
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.

Notification Schedule Setting

Specify the schedule for sending total counter notifications. As an example, the procedure for specifying
settings for "Schedule 1" is described below.
1
Touch [Schedule 1] in the Total Counter Notif. Setting screen.
C650
Description
Specify the time when notification of the total counter is sent. Two notification sched-
ules can be specified. For details, refer to "Notification Schedule Setting" on
page 4-95.
Specify the e-mail address where notifications will be sent. A schedule can be speci-
fied for each address. For details, refer to "Address Setting" on page 4-98.
Specify the name of the model indicated in the notification message. Use the keyboard
that appears in the touch panel to type in the model name (20 characters or less).
Touch this button to send the current total counter information to the specified desti-
nation.
4
4-95