Fiery KM-C2230 Color Manual page 67

2
2-29 Using AutoCal and ColorCal
13. To perform the scanner calibration, click Continue in the ColorCal dialog box that
appears.
After the scanner has been calibrated, another dialog box appears, prompting you to
calibrate the Fiery X3e.
14. Click Measure in the AutoCal or ColorCal Get Measurements pane.
15. Follow the directions in the dialog box for placing the Gray Scale strip and the
measurement page on the copier/printer glass. Click Continue.
AutoCal
16. Click Continue in the Calibrator Information dialog box (on your Windows or Mac OS
computer).
17. Click Apply in the main Calibrator window to implement the new calibration set.
18. Click OK in the Information dialog box.
This completes the calibration process.
ColorCal