Fiery KM-C2230 Color Manual page 18

1
1-4 Fiery X3e Color Management
Fiery X3e color print option
RGB Source Profile
EFIRGB/sRGB (PC)
/Apple Standard/Other/
Source 1-10/None
(Default set at Setup or with ColorWise Pro
Tools)
(Other) Gamma
1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2.6/2.8/3.0
(Default set at Setup or with ColorWise Pro
Tools)
(Other) White Point
5000 K (D50)/5500 K/6500 K (D65)/
7500 K/9300 K
(Default set at Setup or with ColorWise Pro
Tools)
(Other) Phosphors
Hitachi EBU/Hitachi-Ikegami/NTSC/
Radius Pivot/SMPTE/Trinitron
(Default set at Setup or with ColorWise Pro
Tools)
CMYK Simulation Profile
SWOP-Coated/DIC/Euroscale/
Simulation 1-10/None
(Default set at Setup or in ColorWise Pro
Tools)
CMYK Simulation Method
Quick/Full (Source GCR)/Full (Output
GCR)
(Default set at Setup or with ColorWise Pro
Tools)
Applies an RGB source space definition to RGB data (see
choose the Other setting, you must also specify particular settings for Gamma,
Phosphors, and White Point. See the corresponding options in this table. This
option, along with Gamma, Phosphors, and White Point, only affects
DeviceRGB or calibrated RGB color spaces. This option is only available with
the PostScript driver.
Applies the specified gamma
page 1-11). To use this print option, you must choose Other as the RGB
Source Profile setting. This option is only available with the PostScript driver.
Applies the specified white point
definition (see page 1-11). To use this print option, you must choose Other as
the RGB Source Profile setting. This option is only available with the
PostScript driver.
Applies the specified phosphor
space definition (see page 1-11). To use this print option, you must choose
Other as the RGB Source Profile setting. This option is only available with the
PostScript driver.
Adjusts CMYK color data to simulate an offset press standard or a custom
color gamut defined at your site. Choosing None bypasses simulation (see
page 1-12). This option is only available with the PostScript driver.
Quick simulation applies one-dimensional transfer curves that adjust output
density only. The Full simulations apply colorimetric transformations that
adjust hue as well as output density (see
available with the PostScript driver.
What it does
page
value to the RGB source space definition (see
value to the RGB source color space
(monitor type) information to the RGB source
page 1-14). This option is only
1-11). If you