Specifying Only One Destination; Specifying From Registered Destination - Konica Minolta bizhub C550 User Manual

Transmission
2.6

Specifying only one destination

Only one destination can be specified in internet fax in the following ways.

- Specifying from registered destination

- Specifying by direct input
- Specifying from the program destination
!
Detail
For details on the method of specifying form registered destination, refer
to "Specifying from registered destination" on page 2-24.
Refer to "Specifying by direct input" on page 2-30 for the method to
specify by direct input.
Refer to "Send a fax with Program destination" on page 2-40 for the
method to specify from the program.
Specifying from registered destination
When the Address Book is registered, specification can be done by search-
ing from registered search text.
% Touch the desired destination button in displayed [Address Book] tab.
– When desired destination button is not displayed, it can be
searched by the following methods.
Touch search text button
Searching by destination type
Enter the details and search
– Re-select the destination to be cancelled to cancel the selected
destination.
– If [Reset] key is pressed, the selected destination and the settings
are cleared.
– For details on registered destination, refer to the "Registering the
Address Book" on page 8-4.
– Refer to the "Searching the registered destination (Search text but-
ton)" on page 2-25 for the method of searching the registered des-
tination by touching search character button.
– For details on method of searching by destination type, refer to the
"Searching the registered destination (Address Type)" on
page 2-26.
C550
2
2-24