Konica Minolta bizhub C550 User Manual page 50

Transmission
Entered destination is displayed in the left panel of Broadcast Destina-
tion list.
7
Press [Start] key.
– The following screen is displayed when the TX Result Report Check
screen is set for display. The TX Result Report is printed on touch-
ing [Yes].
– When the Destination Check Display Function is set, the Destina-
tion Settings screen is displayed. Confirm that the destination is
correct and touch [Send]. For details, refer to the "Sending the fax
after reconfirming the destination (Destination Check Display Func-
tion)" on page 6-45.
– Press [Stop] key when the fax sending is aborted.
Scanning of the original begins, and the original is sent.
!
Detail
If the fax cannot be sent, refer to "Fax cannot be sent (Internet Fax)" on
page 4-2.
If the fax could not be sent, a TX Result Report is printed (When specified
as to print the TX Result Report). And, it can be set such that the TX Re-
sult Report Check screen is displayed so as to enable the selection of
whether or not to output the transmission result report for every transmis-
sion. For details on printing report procedure, refer to the "Specifying Re-
port Printing Methods (Report Setting)" on page 9-88.
For details on TX Result Report, refer to the "TX Result Report" on
page 10-9.
C550
2
2-6