Konica Minolta bizhub C452 Security Manual page 64

2.11 Changing the Administrator Password
10 seconds to turn it on after turning it off. If there is no wait period between turning the main power
switch off, then on again, the machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on
and off:
Turn off the sub power switch → Turn off the main power switch → Turn on the main power switch
→ Turn on the sub power switch
5
Enter the new 8-digit Administrator Password from the keyboard or keypad.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the Security Settings screen.
6
Touch [OK].
% If the Administrator Password entered does not meet the requirements of the Password Rules, a
message appears that tells that the Administrator Password entered cannot be used. Enter the cor-
rect Administrator Password. For details of the Password Rules, see page 1-8.
% If there is a mismatch in the Administrator Passwords, a message appears that tells that there is a
mismatch in the Administrator Passwords. Enter the correct Administrator Password.
bizhub C652/C652DS/C552/C552DS/C452
2
2-49