Konica Minolta bizhub C452 Security Manual page 119

3.1 User Authentication Function
% If Account Track has been set, enter the User Name, User Password, Account Name, and Account
Password.
% If "Synchronize" has been set for "Synchronize User Authentication & Account Track," successful
authentication results from simply entering the User Name and User Password.
5
Click [Login].
% If there is a mismatch of User/Account Password relative to the registered User/Account Name, a
message appears that tells that authentication has not been successful. Click [OK] to go back to the
screen of step 4. Enter the correct User/Account Name and User/Account Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong User/Account Password is count-
ed as unauthorized access. If a wrong User/Account Password for the corresponding User/Account
Name entered is entered a predetermined number of times (once to three times) or more set by the
Administrator of the machine, a message appears that tells that authentication has not been suc-
cessful for any subsequent operation for authentication. The machine is then set into an access lock
state, rejecting any more logon attempts. To cancel the access lock state, the Administrator of the
machine must perform the Release Setting. Contact the Administrator of the machine.
6
Clicking [Logout] will show the following screen.
Click [OK] to log off from the user operation mode.
bizhub C652/C652DS/C552/C552DS/C452
3
3-9