Create Access Point Groups; Packet Data Access Points - Nokia E75 User Manual

Create access point groups

Select Menu Control panel
>
Connection > Destinations.
Some applications allow you to use access point groups to
connect to a network.
To avoid selecting which access point to use every time the
device attempts to connect to a network, you can create a
group that contains various access points, and define the
order in which the access points are used to connect to a
network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and use
the group for browsing the web. If you give the WLAN access
point the higher priority, the device connects to the internet
through a WLAN if available and through a packet data
connection if not.
To create a new access point group, select
Manage New destination.
>
To add access points to an access point group, select the
group and Options New access
>
access point from another group, select the group, scroll to
an existing access point, and select
Copy to other dest..
To change the priority order of access points within a group,
scroll to an access point and
priority.
© 2008 Nokia. All rights reserved.
Settings and
>
Options
point. To copy an existing
Options Organize
>
Options Organize
> >

Packet data access points

Select Menu
Connection
the instructions on the display. Or, open one of the access
point groups, select an access point marked with
select Edit.
Use the instructions provided by your service provider to edit
the following:
Access point name
•
by your service provider.
User name
•
data connection, and is usually provided by your service
provider.
Prompt password
•
for a password every time you log into a server, or if you
do not want to save your password in the device, select
Yes.
>
Password
•
connection and is usually provided by your service
provider.
Authentication
•
password encrypted or
encrypted when possible.
>
Homepage
•
are setting up, enter the web address or the address of the
multimedia message center.
Change
Use access point
•
device to ask for confirmation before the connection using
this access point is created, or
Control panel Settings
> >
Destinations Access
> >
— The access point name is provided
— The user name may be needed to make a
— If you want to set the device to ask
— A password may be needed to make a data
— Select Secure
Normal to send your password
— Depending on the access point type you
— Select After confirmation
Automatically
Settings
and
point, and follow
, and
to always send your
to set the
to set the
153