802.1X Security Settings; Wpa Security Settings; Wireless Lan Plugins; Eap Plug-Ins - Nokia E75 User Manual

802.1x security settings

Select 802.1x as the WLAN security mode.
802.1x authenticates and authorizes devices to access a
wireless network, and prevents access if the authorization
process fails.
Select WLAN security settings
WPA/WPA2 — Select
•
Protocol) or Pre-shared key
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
Pre-shared key — If you selected
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.

WPA security settings

Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings
WPA/WPA2 — Select
•
Protocol) or Pre-shared key
identification).
EAP plug-in settings
•
EAP, select which EAP plug-ins defined in your device to
use with the access point.
© 2008 Nokia. All rights reserved.
and from the following:
EAP (Extensible Authentication
(a secret key used for device
— If you selected WPA/WPA2
WPA/WPA2
and from the following:
EAP (Extensible Authentication
(a secret key used for device
— If you select WPA/WPA2
Pre-shared key
•
shared key, enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select Off. To
allow AES only, select

Wireless LAN plugins

Select Menu
Connection
>
The extensible authentication protocol (EAP) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
Pre-
>
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).

EAP plug-ins

1. To define the EAP plug-in settings, select
access point
as a data bearer.
2. Select 802.1x
3. Select WLAN security settings
>
EAP plug-in
— If you select WPA/WPA2
— To allow both TKIP and AES
On
Control panel Settings
> >
> Destinations, and an access point group.
and define an access point that uses WLAN
or WPA/WPA2 as the security mode.
>
settings.
Settings
Pre-
>
and
Options New
>
WPA/WPA2 EAP
> >
157