Access Points; Create A New Access Point; Create Access Point Groups - Nokia E52 User Manual

Wireless LAN — Set the device to display an indicator
•
when a wireless LAN (WLAN) is available, and define
how often the device searches for networks.
Video sharing — Enable video sharing, select the SIP
•
profile for video sharing, and define the video saving
settings.
SIP settings — View or create session initiation
•
protocol (SIP) profiles.
XDM profile — Create an XDM profile. The XDM profile
•
is required for many communications applications, for
example, presence.
Presence — Edit the settings for presence (network
•
service). To register for the service, contact your service
provider.
Remote drives — Connect the device to a remote
•
drive.
Configurations — View and delete trusted servers
•
from which your device may receive configuration
settings.
APN control — Restrict packet data connections.
•

Access points

Create a new access point

Select Menu Ctrl. panel
>
Destinations.
You may receive access point settings in a message from
a service provider. Some or all access points may be preset
for your device by your service provider, and you may not
be able to change, create, edit, or remove them.
When you select one of the access point groups (
, , ), you can see the access point types:
Settings and Connection
>
,
2009-11-09 15:1:46
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are
displayed and can be shared by a new access point. If you
skip this step, you are asked to select a connection method
and to define the settings needed.
To edit the settings of an access point, select one of the
access point groups, scroll to an access point, and select
Edit. Use the instructions provided by your service
provider to edit the following:
Connection name
•
Data bearer — Select the data connection type.
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined or with a red *. Other fields can be left
empty, unless your service provider has instructed
otherwise.
>
To use a data connection, your service provider must
support this feature, and if necessary, activate it for your
SIM card.

Create access point groups

Select Menu Ctrl. panel
>
, Destinations.
Some applications allow you to use access point groups to
connect to a network.
Access point. The
— Enter a name for the connection.
Settings and Connection
> >
97