Remote Configuration - Nokia E75 User Manual

Security and data management
To view detailed information about a security module, select
Options Security details.
>
To edit the PIN codes for the security module, open the
module, and select Module PIN
security module or Signing PIN
signatures. You may not be able to change these codes for all
security modules.
The key store contains the contents of the security module.
To delete the key store, select
not be able to delete the key store of all security modules.

Remote configuration

Select Menu Control panel
>
With Device manager, you can manage settings, data and
software on your device remotely.
You can connect to a server and receive configuration settings
for your device. You may receive server profiles and different
configuration settings from your service providers or
company information management department.
Configuration settings may include connection and other
settings used by different applications in your device. The
available options may vary.
The remote configuration connection is usually started by the
server when the device settings need to be updated.
To create a new server profile, select
profiles Options New server
> >
138
to edit the PIN code for the
to edit the PIN code for digital
Options > Delete. You may
Phone Device mgr..
> >
Options Server
>
profile.
You may receive these settings from your service provider in
a configuration message. If not, define the following:
Server name — Enter a name for the configuration
•
server.
Server ID — Enter the unique ID to identify the
•
configuration server.
Server password — Enter a password to identify your
•
device to the server.
Session mode — Select the preferred connection type.
•
Access point — Select the access point to use for the
•
connection or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet as the bearer type.
Host address — Enter the web address of the
•
configuration server.
Port — Enter the port number of the server.
•
User name and Password
•
password for the configuration server.
Allow configuration
•
initiate a configuration session.
Auto-accept all requests
•
the server to ask for your confirmation when it initiates a
configuration session.
Network authentication
•
authentication.
Network user name
•
your user ID and password for the http authentication.
This setting is available only if you have selected
authentication to be used.
— Enter your user ID and
— Select Yes to allow the server to
— Select Yes if you do not want
— Select whether to use http
and Network password
© 2008 Nokia. All rights reserved.
— Enter
Network