Create Access Point Groups; Packet Data Access Points - Nokia 5235 Comes with Music User Manual

Connectivity
shown and can be shared by a new access point. If you skip this step, you are asked
to select a connection method and to define the settings needed.
To edit the settings of an access point, open one of the access point groups, and
select an access point. Follow the instructions from your service provider.
● Connection name — Enter a name for the connection.
● Data bearer — Select the data connection type.
Depending on the data connection you select, only certain setting fields are
available. Fill in all fields marked with Must be defined or with a red *. Other fields
can be left empty, unless your service provider has instructed otherwise.
To use a data connection, your service provider must support this feature, and if
necessary, activate it for your SIM card.

Create access point groups

Select Menu > Settings and Connectivity > Destinations.
Some applications allow you to use access point groups for network connections.
To avoid selecting a single access point every time the device makes a network
connection, you can create a group that contains various access points to connect
to that network and define the order in which the access points are used.
To create a new access point group, select Options > Manage > New
destination.
To add access points to an access point group, select the group and Options >
New access point. To copy an existing access point from another group, select the
group, tap the relevant access point if it is not already highlighted, and select
Options > Organize > Copy to other dest..
To change the priority of an access point within the group, select Options >
Organize > Change priority.

Packet data access points

Select Menu > Settings and Connectivity > Destinations > Access point, and
follow the instructions on the screen.
© 2010 Nokia. All rights reserved. 123