Viewing Multiple Units With A Networked Large Display; Figure 19 Menu Tree—Large Display, Networked - Emerson Liebert Challenger 3000 Operation & Maintenance Manual

4.8

Viewing Multiple Units with a Networked Large Display

When you first wake up the control, press the ESC key to return to the System view Status menu.
This view shows an average of all the units on the network and any alarms present. To view a specific
unit on the network, press either the enter key or down arrow key. When you do this, you will see the
word System in the top left of the screen change to a unit number. Using the left and right arrow keys
you can toggle through the various units on the network. To go back to the System view, or back one
level from any menu in the control, press the ESC key.
Figure 19 Menu tree—Large display, networked
Unit # or System will be
displayed in the top left
corner of the screen .
User Menu
Unit #
Password
Setpoints
Spare Part List
Event Log
Graphics
View Network
Set Alarms
Sensor Data
Active Alarms
Display Setup
Total Run Hours
Sleep Mode
Service Contact Info
Status Menu – System View
(Networked Large Display Only)
Status Menu
Unit 1 View
Service Menu
Standby Settings/Lead-Lag
Maintenance/Wellness Settings
Diagnostics / Service Mode
Sensor Calibration/Setup
System/Network Setup
Options Setup
Service Contact Info
Liebert iCOM Display Components and Functions
Status Menu
Unit 2, 3, 4...
Unit #
Password
Setpoints
Unit Diary
Set Alarms
26
Advanced Menu
Unit #
Password
Factory Settings
Compressor Info
Access Passwords