20
Use
Press button
●
start after the selected delay has expired.
Cancelling the delayed start:
set the washing machine to PAUSE by pressing the button
●
press the button
●
press the button
●
The button
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
7
button
.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O and then to the new programme position. The
washing water in the tub will be not emptied out. Start the new programme by
depressing the button
Interrupting a programme
Depress the button
corresponding light starts to . Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O to cancel a programme which is running. Now you
can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button
if the DOOR symbol disappears, the door can be opened.
●
if the DOOR symbol doesn't go off, it means that the machine is already
●
heating, that the water level is above the bottom edge of the door. In this
case the door cannot be opened.
If you cannot open the door but you need to open it, you have to switch the
●
machine off by turning the selector dial to O. After some minutes the door
can be opened (pay attention to the water level and temperature!).
7
: the machine starts its hourly countdown. The programme will
8
until the symbol
7
again to start the programme.
8
cannot be selected with DRAIN programme
7
again.
7
to interrupt a programme which is running, the
0'
is displayed;
.
7
.
7
;