Selected The Desired Option - Electrolux WA SL1 E100 User Manual

Table of Contents

Advertisement

RINSE HOLD: by selecting this option the water of the last rinse is not emptied out
to prevent the fabrics from creasing. At the end of the programme,
HOLD symbol appear on the display, DOOR symbol (door locked) remains lit, the pilot
light of button
be emptied out.
NIGHT CYCLE: by selecting this option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed,
this washing cycle is very noiseless and it can be selected at night or in times with a
more economical power rate
with more water. At the end of the programme,
appear on the display, the DOOR symbol remains lit, the pilot light of button
goes off and the door is blocked to indicate that the water must be emptied out.
To empty out the water, please read chapter «At the end of the
porgramme».
Select the desired option by means of button 4 and confirm your
choice by means of button 5
Depending on the programme, different functions can be combined.
Attention: Not all the options are compatible among themselves. The symbols of
the incompatible options disappear.
Anyway, if an option, which is not compatible with the set washing programme
or any other option, is selected, the Err message is displayed for few seconds
and the yellow pilot of button
You must select the options after you have selected the programme but before
pressing the button
display.
To scroll all the available options, press the button
appears on the display and starts blinking.
Press the button
under the selected symbol to indicate that this option has been set. Press the
same button to deactivate the option.
After selecting the options, wait about 10 seconds untill the display gets back to
the default status. The selected options appear on the display.
For the compatibility between this option and washing programmes consult the
chapter «Washing programmes».
7
goes off and the door is blocked to indicate that the water must
In some programmes the rinses will be performed
.
7
7
. Press the button
5
to activate and confirm your choice. A black dash appears
0
and RINSE HOLD symbol
light starts blinking.
4
: all the option symbols appear on the
4
0
and RINSE
. The corresponding symbol
Use
17
7

Advertisement

Table of Contents
loading

Table of Contents