Table of Contents
Advertisement
DISPLAY
9.7
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes (for
example
2.05
maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Delay start
The selected delay (20 hours max) set by means of the relevant button appears
on the display for about 3 seconds (for example
previously selected programme is displayed.
The DELAY START symbol will appear on the display.
The delay time value decreases by one unit every hour and then, when remains 1
hour, the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for about 2 seconds and the yellow light of button
7
starts blinking.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for
E20
example
End of the programme
When the programme has finished a blinking zero
symbol disappears and the door can be opened.
9.8
DELAY START
9.9
CHILD SAFETY LOCK
). The duration is calculated automatically on the basis of the
(see chapter «What to do if...»).
- symbol
- symbol
90'
), then the duration of the
0
is displayed, the DOOR
Display
13
Advertisement
Table of Contents
