Programme Progress Display; Cancelling A Programme; Altering An Option Or A Programme Which Is Running - Electrolux AEG LAVAMAT L 5011 Instruction Booklet

To empty out water there are two possibilities:
• Select programme DESAGUAR
The water is emptied out without spinning.
• Select programme CENTRIFUGAR
means of the relevant button and then depress the START/PAUSE but-
ton. The water is emptied out and the laundry is spun at the selected
spin speed.
Warning! The programme selector dial must be turned first to RESET
O/OFF and then to the DESAGUAR
.

Programme progress display

By selecting the wash programme, the
pilot lights corresponding to the various
phases making up the programme come
on.
After the machine has started, only the
running phase pilot light stays on. When the programme has finished,
the FIN

Cancelling a programme

To cancel a programme which is running, turn the programme selector
dial to the RESET O/OFF position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O/OFF and then to
the programme DESAGUAR

Altering an option or a programme which is running

To alter an option, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any option can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
(End) pilot light comes on.
Description of the appliance
(draining):
(SPIN). Select the spin speed by
programme or CENTRIFUGAR
or CENTRIFUGAR
PREWASH/ PRELAVADO/
WASH LAVADO
RINSE ACLARADO
EXTRA
ACLARADO +
RINSE
SPIN CENTRIFUGADO
END FIN
DOOR PUERTA
.
51