Honeywell Dolphin Power Tools User Manual page 87

Decode Section
The Decode section specifies decoder settings when using the decoder with ScanWedge.
ScanWedge Entry
GoodScanFreq
GoodScanLen
BadScanFreq
BadScanLen
Description
Sound frequency used for play a
custom good scan beep.
The Window's "Good Decode" sound
(if defined in the control panel) takes
precedence over this option.
Number of milliseconds to play the
sound as specified in GoodScanFreq
key.
Sound frequency used for play a
custom bad scan beep.
The Window's "Bad Decode" sound
(if defined in the control panel) takes
precedence over this option.
Number of milliseconds to play the
sound as specified in BadScanFreq
key.
Default Available Values
Value
2749 Variable
Use the up and down arrows to
change the number
OR
50
Type in the code for the sound you
want.
523
25
5 - 11