Honeywell Dolphin Power Tools User Manual page 139

Mode and Kernel Check
In each Subsection root in the tree, there should be two key-value pairs: Mode and KernelCheck.
If these keys are not present, the defaults will be applied:
Mode=Exclude
KernelCheck=Enabled
Mode
The Mode key specifies export behavior of the values in the section.
1=Include
0=Exclude
KernelCheck
KernelCheck forces kernel version and service pack validation when a previously exported REG file is
imported on a Dolphin terminal. This means that if you attempt to load a _RegBackup.reg file (during
AutoInstall, for example), RegBackup.exm verifies that the REG file matches the kernel installed on the
terminal. If yes, then the REG file loads. If not, you'll receive a warning message and the REG file will not
load.
0=Disabled
1=Enabled
Only the values that follow will be included.
Everything but the values that follow will be included.
No kernel validation occurs on importing. In general (especially for radio settings),
KernelCheck should be enabled. if the registry does not match the kernel, the terminal will
not function properly.
Kernel validation occurs on importing.
8 - 9