Honeywell Dolphin Power Tools User Manual page 24

Edit Menu Options
Select a section click Edit to see the available options.
Rename
Cut
Copy
Paste
Paste as Child
Delete
Enable
Disable All
Insert Section
Append Child Section This menu item adds a new child section to a selected section. The new child section is
2 - 8
Activates the section name so that you can rename the section.
Note: You cannot modify the name if the section is locked; see
Cuts a selected section.
Copies a selected section.
Pastes the section that was just cut or copied at the same level as the selected section.
Pastes the section that was just cut or copied as a child of the selected section.
Note: You can cut, copy and paste sections within an EXM file or across EXM files.
Deletes a selected section.
Note: Because you cannot undo a delete, consider disabling rather than deleting.
Sections are enabled by default. This menu item enables sections that have been disabled
prior. You can enable a section only if its parent section is enabled. To enable all the keys
inside a section you are enabling, SHIFT + right-click and select
Sections are enabled by default. This menu item disables sections and all of its keys.
Disabled sections remain in the file with a gray folder
If you disable a section that has child sections, all of its child sections (and the child section
keys) are disabled automatically. The child section folders are also in gray.
When reading the EXM file, the terminal behaves as though disabled sections are not there
and moves on to read the next enabled section.
Disabled sections can be removed from the EXM file permanently using the
Document (see page 2-5) option. If you want to keep disabled sections in the EXM file on
the workstation but not in the file deployed to the terminal, use the Simplified option (see
page 2-21) when creating the bar code.
This menu item inserts a new section. You can also press the Insert key (INS).
inserted below the previous section.
Section Locks (page 2-9).
Enable All
.
.
Simplify