Command Line Arguments - Honeywell Dolphin Power Tools User Manual

Scanning Bar Codes Directly from the Power Tools Main Window
When the Power Tools or Demos main windows are open, press the SCAN key and:
• If there is only one bar code in the package, EZConfig Client decodes and deploys the bar code without
opening the EZConfig Client window.
• If there are multiple bar codes in the package, EZConfig Client decodes the first bar code and opens
the EZConfig Client window showing that one bar code in the package has been scanned.
Launching EZConfig Client with a HotKey
Pressing ALT + SCAN launches EZConfig Client from any application window after you activate the
HotKeys Power Tool; see
ScanWedge
Bar code decoding in EZConfig Client is compatible with ScanWedge. You can set ScanWedge to pass
bar code information to EZConfig Client for further processing. For details, see
5-4.

Command Line Arguments

/%filename
/q
/s
/o
/e
/u
2 - 34
HotKeys on page
Executes the EXM file; this is the default entry.
Quiet mode
Full screen
No menu
Exit if first scan fails to deliver a valid bar code
Accept (decode) unsecure bar codes
6-5.
Accept EZConfig on page