Honeywell Dolphin Power Tools User Manual page 117

RASMan Configuration File
RASMan application settings are stored in the Settings section of
(see page 2-2) to change the values in the RASMan.exm file.
Key
Retry
RetryDelay
ShowError
ShowStatus
StatusMessageDelay
StopOnCriticalError
TrayIcon
Description
Specifies the retry count.
Specifies the retry delay.
Enables and disables error
messages on connecting.
Enables and disables the
appearance of status dialog boxes.
Specifies a delay in milliseconds (i.e
1000 is 1 second) to apply after
status and error messages are
displayed.
Forces RASMan to stop running
when a critical error occurs.
Enables or disables the RASMan
tray icon.
\IPSM\RASMan.exm
Default Available Values
Value
10
1000 Enter values in milliseconds.
1 0=Disable
1=Enable
1 0=Disabled; status dialogs do not
appear.
1=Enabled; status dialogs do appear.
25 X=Number of milliseconds.
1 0=Disabled; RASMan continues to
run when a critical error occurs.
1=Enabled; RASMan stops running
when a critical error occurs.
1 0=Disable
1=Enable
. Use EZConfig Editor
6 - 13