Menu Configuration File Sections - Honeywell Dolphin Power Tools User Manual

Modifying Menu Configuration Files
Menu configuration files can be modified in EZConfig Editor on the workstation or the terminal
For details:
See EZConfig Editor on page 2-2.
to the terminal.
See EZConfig Editor on the Terminal on page 2-27.
Creating Menu Configuration Files
Use the Default EZMenu Configuration Files
1. On the workstation, navigate to the C:\Program Files\Honeywell\Power Tools and Demos\EZConfig
Editor folder.
2. Open a sample menu configuration file in EZConfig Editor.
3. Tap File > Save As and save the file with a new name ending in "Menu.exm."
4. Modify the file; to see the available values, see
5. Save or transfer the file to the

Menu Configuration File Sections

Menu configuration files contain of two basic sections: Settings and MenuEntries. Both sections are
locked, which means only their Values can be changed.
Settings Section
The Settings section defines general EZMenu settings. The keys in this section are locked, which means
that only their Values can be changed.
Key Description
Sig Identifies this file as a menu file.
Version This is the EZMenu version number.
EnableDebug Enables system debugging.
ListViewMode Determines the default view mode for the
window. For details, see
page
If modified on the workstation, the *Menu.exm file must be deployed
(see page 9-1) to create new menu configuration files.
(\Honeywell for 6100/6500)
\IPSM
View Options
1-4.
Menu Configuration File Sections
folder on the terminal.
Default Available Values
Value
EZMen These keys are read-only and
cannot be changed.
u
1
0 0=Disable
1=Enable; an Easymenu.log file is
created in the \IPSM
6100/6500)
3 0=Detail
1=List
on
2=Small Icon
3=Large Icon
on page 9-3.
(\Honeywell for
folder.
9 - 3