Low Battery Indicator - Directed Electronics CLIFFORD 1.3X Owner's Manual

Low battery indicator

Rear View
When the batteries are low, the 2- way remote emits two groups of beeps,
1
the LED flashes, and additional horn honks are emitted when unlocking. It
is time to change the batteries. When the battery is low on the 1- way remote
the only indication is additional horn honks emitted when unlocking.
Battery
Cover
Note: Horn honk is an optional feature.
Battery Replacement
Side View
1
Latch
Battery
Tray
© 2011 Directed Electronics. All rights reserved.
2
Battery
Clip
+
Rear View
2
+
1. Slide the battery cover up by applying
equal pressure at its top and bottom (the
arrow on the cover indicates the direction),
remove the cover from the remote control
housing.
2. Gently pry up on the battery to remove
it from the holder. Insert a new battery into
the holder and under the clip with the posi-
tive (+) side up. Replace the battery cover.
The remote control is now ready for use.
13