Table of Contents
Advertisement
and CHARGE is displayed on the LCD. Once the battery has accu-
mulated enough charge for functionality, the LCD icons initialize with
a beep sound, the battery status outline stops flashing and the remote
becomes operational while still displaying CHARGE.
➤ Low battery indicator
When the batteries are low on the 2-way remote it will emit two groups
of beeps, the battery icon will flash and the text will display low batt,
the alarm then emits an additional chirp upon disarming of the alarm to
let you know its time to change the battery. When the battery is low on
the 1-way remote, the remote responds the same, but without the icons
available on the two way remote.
Note:
The Arm/Disarm chirps should be programmed ON for the
Sat mode,
alarm to emit any additional chirps during disarm. Ask your autho-
bank selector
rized dealer if you have any questions.
Category
➤ Battery Replacement
Control
Slide the door up to expose the battery beneath the holder. Remove the
expired battery. Place the new battery into the remote control. When
Toggles
Scan mode
power is returned the remote control is ready for use.
20
The temperature range over which
Warning!
the battery can be charged is 0ºC TO 45ºC
(32ºF TO 113ºF). Charging the battery at
temperatures outside this range may cause
severe damage to the battery or reduce bat-
tery life expectancy.
Bank and
present
indicator
REW
1
Tune mode
indicator
11:53
CATEGORY
CH
XM1-1
CH-001
FF
PLAY/PROG
2
3
SCAN
VOL
AUDIO
© 2008 Directed Electronics. All rights reserved.
PWR
Channel
and text
indicator
NR
DISC-
DISC+
4
5
6
SOUND
Advertisement
Table of Contents
