Valet Mode - Directed Electronics CLIFFORD 1.3X Owner's Manual

UnLocking without the honk (Silent Unlock)
1
Press the button on the remote one-time, and then press the
vehicle unlocks without the confirmation honk. The parking lights flash two-
times. The 2- way remote flashes the
1
confirmation is received, the 2- way remote emits the out-of-range signal.
When unlocking in valet mode with the 2- way remote, the remote generates
two error tones and the

➢ Valet mode

You can prevent your system from automatically activating the Failsafe® Starter
Kill. When the system is in Valet mode, the feature is disabled. The doors
do not automatically lock. This is useful when washing or having the vehicle
serviced.
To enter or exit valet mode with the Control button:
To enter or exit Valet mode with the remote control:
Press two times, and then
process to take the system out of Valet Mode.
The Control Center LED turns on solid when in Valet Mode and turns off when
exiting Valet Mode.
20
1
X
A U
and LEDs light up.
X
A U
1. Turn the ignition key on and then off.
2. At anytime during the next 10 seconds, press and
release the Control button on the Control Center.
The LED turns on solid when you enter Valet®
Mode, and turns off when you exit Valet Mode.
to set the system in Valet Mode. Repeat the
LED to confirm unlocking. If no unlock
2
3
4
5
6
© 2011 Directed Electronics. All rights reserved.
2 button. The
3
4
A U X
5
6