Table of Contents
Advertisement
Switch the display to the monitor by pressing Fn+F9, or change the display through
l
the settings in Display Properties.
Simultaneous display/multi-display does not work.
Make sure you turn on the external monitor before turning on the computer.
l
Press Fn+F9 to toggle through the display options or change the settings in Display
l
Properties in Wi n dows.
Hardware Device Problems
The computer does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup Utility. Run the BIOS
l
Setup Utility program to identify the new type.
Determine if the device driver needs to be installed (Refer to the documentation that
l
came with the device).
Determine if the device needs any jumper or switch settings (Refer to the
l
documentation that came with the device).
Check the cables or power cords for correct connections.
l
For an external device that has its own power switch, make sure the power is turned
l
on.
8-8
Troubleshooting
Advertisement
Table of Contents
