Table of Contents
Advertisement
14
Connections
The display has three USB 2.0 ports for connection an external USB device and a connector
for attaching the cable from the MW810 CPU or another laptop or desktop.
CAUTION: Do not connect or disconnect any external device during the BIOS boot process
or when the CPU is in power-saving mode.
USB Device
USB devices are hot-pluggable. This means you can connect and disconnect devices while
your operating system is running. Using USB 2.0 ports you can connect external low, high,
and full-speed USB clients
To connect a USB device, simply plug the device cable to one of the USB ports. The devices
you connect to the USB ports usually require installing a driver, as the required software is
already included in the operating system. However, if the USB device requires its own
software, please install it from the data carrier provided with the device.
CAUTION: do not use right- and left-side USB ports for permanent connections. Always
disconnect USB accessories from these ports when driving.
CAUTION: a device connected to the USB port should not consume more than 0.5A.
Otherwise, the system will not operate properly.
Smart Card Reader
The MW810 Display incorporates a Smart card reader based on the OMNIKEY®
Smart@Link Chipset 83C230K203.
NOTE: When inserting the Smart Card into the Smart Card Compartment, the Smart Card
should reach a stop to lock inside the Smart Card Compartment. To remove the Smart Card,
open the Smart Card Door and gently press the Smart Card into the Smart Card
Compartment to unlock.
Connecting the laptop
Follow instructions below when you need to connect the display to a laptop:
•
Switch off the laptop and the display
•
Connect the data cable to the laptop's monitor connection
•
First switch on the display and then the laptop
Use Motorola original integrated molded cables for connection to the MW810 or 3
CPU's. For details see MW810 Installation Manual.
6802982C85-C
Display USB 2.0 ports support transfer rates up 480 MB/s.
.
rd
-party
Advertisement
Table of Contents
